Sizing & How to Apply

Here’s everything you need to know about our wallpaper styles (plus exactly what size to order for your space 👇)

Measure your wall (height × width), then match it to the roll coverage below. Always round up (trust us—you’ll be glad you did).

(EXAMPLE)

Your Wall size:

8 ft (height) × 10 ft (width) = 80 sq ft

Roll size:

1.6 ft (width) × 32.8 ft (length) = 52.48 sq ft per roll

Now:

80 ÷ 52.48 ≈ 1.53 rolls

You’ll need about 2 rolls of 1.6 ft by 32.8 ft wallpaper to fully cover an 8 by 10 ft wall!

Roll Size Metric Feet Coverage (sq ft)
Mini Roll 50cm x 200cm 1.64 ft x 6.56 ft 10.7 sq ft
Standard Roll 50cm x 300cm 1.64 ft x 9.84 ft 16.1 sq ft
XL Roll 50cm x 500cm 1.64 ft x 16.4 ft 26.9 sq ft

 

 

Roll Size Metric Feet Coverage (sq ft)
Small Roll 40cm x 100cm 1.31 ft x 3.28 ft 4.3 sq ft
Medium Roll 40cm x 200cm 1.31 ft x 6.56 ft 8.6 sq ft
Large Roll 40cm x 300cm 1.31 ft x 9.84 ft 13 sq ft
XL Roll 40cm x 500cm 1.31 ft x 16.4 ft 21.5 sq ft

 


Roll Size Metric Feet Coverage (sq ft)
Standard Roll 60cm x 300cm 2 ft x 9.84 ft 19.7 sq ft
Large Roll 60cm x 500cm 2 ft x 16.4 ft 32.8 sq ft
 XL Roll  60cm x 1000cm 2 ft x 32.8 ft 65.6 sq ft

___________________________________________________________________________

How to Apply Wallpaper

What You’ll Need:

  • A clean cloth
  • A ruler or measuring tape
  • A utility knife or scissors
  • A smoothing tool (or credit card works too!)

Step 1: Prep the Surface

Make sure the wall (or surface) is clean, dry, and smooth. Wipe away any dust or grease with a clean cloth. Let it dry completely.

Step 2: Measure & Plan

Measure the height and width of your wall.
Decide where you’ll start — usually from top to bottom, left to right. Mark a light guideline if needed to keep it straight.

Step 3: Peel Off a Little Backing

Start at the top of the panel. Peel off a few inches of the backing paper to expose the adhesive — don’t peel the whole thing yet!

Step 4: Stick & Smooth

Stick the top of the wallpaper to the wall and smooth it down as you go, using your hands or a smoothing tool.
Peel more backing gradually, pressing out air bubbles as you move down.

Step 5: Line Up the Next Panel

If you're doing multiple panels, line up the pattern carefully and slightly overlap if needed.
Repeat the process — peel, stick, and smooth!

✨ Step 6: Trim the Edges

Once everything is in place, use a sharp utility knife or scissors to trim off any extra around the edges, outlets, or corners.

It’s that easy — Peel. Stick. Love.

📩 Still not sure? Email us at peelandperfect@gmail.com and we’ll help plan it out for you!